Norwood LumberMate LM29V2 Anleitung Seite 9

Parts List: HD26V2
Qty.
1 Electric motor - Motor - 7.5kW S1 duty, 2900 RPM, 400/690V 50 HZ
HD36-BOX #14D (E.U., 7.5kW, 400/230V, 3PH Electric)
1 Belt - Drive belt (HD36 Electric) (B92-V)
1 Bushing - 38mm QD metric (for MILL-SHV46IN & MILL-SHV56IN sheaves) (HD36, LM29)
1 Sheave - 6.8" sheave - bushing MILL-BUSH38MM required
2 Rear leg assembly (LM34, HD36) - Spacer
2 Sawhead lift cable (HD36 ELECTRIC) (125" OAL) (Colored End)
1 Manual - Electric Motor System (S1) (English)(LM29v2, MN26v2, HD36, HD38)
MILL-BAG #ELECT - 400/230V, E.U. Electric
1 Safety switch key
10 3/8 nut - flanged nylon lock nut
6 3/8 nut - flanged (regular)
12 3/8 x 1" bolt - flanged bolt
5 Cable tie - Reusable nylon 6" black
3 Cable tie mount - Adhesive mount
2 3/8 x 2" bolt - flanged bolt
4 3/8 x 1 1/2" bolt - flanged bolt
2 #10 - 32 nut - hex
2 #10 - 32 x 1 1/2" screw - Phillips machine screw
2 #6 - 5/8 screw - Phillips truss head tapping screw
HD36-BOX #15 (E.U., 7.5kW, 400V, 3PH Electric)
1 Electric - Control Panel w/controler&12v converter - 4 to 7.5kW,Y-D,400V,3PH,S1(2020)
Control Panel Assembly (factory-assembled):
2 Electric – Safety switch for back cover w/ 1.6m wiring (LMMNv2, HD36v2)
1 Electric - Remote control box clamping bracket (LM29v2, MN26v2, HD36)
2 Electric - Control panel clamp (HD36) (from 2020)
4 M4 x 8mm screw
2 M4 x 30mm screw
2 M4 nut
1 Power cable clamp
MILL-ELEC-S1-MANEN (2021-07-14).indd 5 MILL-ELEC-S1-MANEN (2021-07-14).indd 5
(7.5 kW electric motor (S1) (400V, 3 Phs) package)
Description Norwood No.
ENGE-11KWS3-EU
HD36-DBB92
MILL-BUSH38MM
MILL-SHV68IN
LM34-C0220-SPC
HD36-SHCBL-ELEC
MILL-ELEC-S1-MANEN
LM34-SFTY2
FASN-38LNF
FASN-38RFL
FASB-38X1L
DBKR-CTIE6
DBKR-CTMA
FASB-38X2F
FASB-3815F
FASN-1032H
FASS-10112PMS
FASS-658PT
ENGE-YD-S1-400V-CP-12V
ENGE-SFTY-001
MILL-EUELEC-0012
N/A
N/A
N/A
N/A
N/A
EN–5
2021-07-14 3:54:02 PM 2021-07-14 3:54:02 PM