Norwood LumberMate LM29V2 Anleitung Seite 17

MILL-ELEC-S1-MANEN (2021-07-14).indd 13 MILL-ELEC-S1-MANEN (2021-07-14).indd 13
For MN26v2 and LM29v2
Install the control panel bracket to the
control panel, secure with the four M10 bolts
previously removed from the panel.
Install the control panel bracket on the non-
operator side of the MN26v2 and LM29v2
sawmill carriage. Secure the bracket with the
two 3/8" bolts previously removed from the
MN26 and LM29v2 carriage assembly.
Secure the bracket with the 3/8" x 1" flanged
bolts and 3/8" nuts.
EN–13
2021-07-14 3:54:05 PM 2021-07-14 3:54:05 PM