Cleaning And Maintenance - Medisana 60104 Gebrauchsanweisung

3.2 Cleaning and maintenance

Heat pad
•
Before cleaning the pad, unplug it from the mains outlet and let it cool down for
at least ten minutes.
•
The heat pad is equipped with a removable control unit (Art. 60104: "HKS/HP620";
Art. 60114/60124/60144/61144: "HKC,-M,-N/HP615"). Unplug the control unit from
the heat pad by pulling out the connection cable from the plug on the heat pad.
•
The heat pad can be cleaned with a soft brush when dry.
•
The heat pad may be carefully washed by hand. Ideally you should place the
heat pad in a bathtub with warm water and a little mild detergent and squeeze
it gently.
•
Rinse the pad several times to get rid of any remaining detergent.
•
Never use strong detergents or hard brushes.
•
To dry, lay the pad flat on a moisture-absorbent towel or mat.
•
Only use the blanket again once it is completely dry.
•
Reconnect the control unit to the heat pad in the
correct manner (please see the sketch, the arrow
markings are showing towards each other).
•
You should untangle the cable from time to time.
•
Store the unit in a clean and dry place, laid out flat
with nothing covering or resting on top of it.
Heat pad cover
•
Remove the heat pad from its cover.
•
Dry clean the removable cover or as detailed in the instructions on the label.
3.3 Disposal
This product must not be disposed together with the domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless of
whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally accep-
table manner. Consult your municipal authority or your dealer for information about
disposal.
3 Miscellaneous
E
E
E
E
GB
E
E
E
E
E
E
E
E
15