Settings; Function Settings - Pioneer FH-X840DAB Bedienungsanleitung

Standard mode
You can create a 4-speaker system with front and rear speakers or front speakers and
subwoofers, or a 6-speaker system with front and rear speakers and subwoofers.
Adjusting the cut-off frequency value and the slope
value
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
Network mode:
[HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF]
(middle-range speaker LPF), [SUBWOOFER]
Standard mode:
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 16).
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [AUDIO], then press to confirm.
3
Turn the M.C. dial to select [CROSSOVER], then press to confirm.
4
Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to
confirm.
5
Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),
then press to confirm.
6
Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit
(filter) selected in step 4, then press to confirm.
Network mode:
[1.25K] to [12.5K] (if you choose [HIGH] or [MID LPF])
[25] to [250] (if you choose [MID HPF] or [SUBWOOFER])
Standard mode:
[50HZ] to [200HZ]
7
Turn the M.C. dial to select an appropriate slope for the speaker unit (filter)
selected in step 4.
Network mode:
[–6] to [–24] (if you choose [HIGH], [MID HPF] or [MID LPF])
[–12] to [–36] (if you choose [SUBWOOFER])
14
En
Standard mode:
[–6] to [–24]

Settings

You can adjust various settings in the main menu.
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 14)
• AUDIO settings (page 15)
• SYSTEM settings (page 16)
• ILLUMINATION settings (page 18)
• MIXTRAX settings (page 18)
3
Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.
Menu Item
S.FOLLOW
[ON], [OFF]
SOFTLINK*1*2
[ON], [OFF]
PROGRAM TYPE
[NEWS/INFO],
[POPULAR],[CLASSICS],[OTHERS]
ENSEMBLE
Description
Search for another ensemble that supports the
same service component with better reception.
If no alternative service component can be found
or reception remains poor, the unit will
automatically switch to an identical FM
broadcast.
If the reception of the service component being
received becomes poor, the unit will
automatically switch to a station with a similar
broadcast.
Displays the program type information.
Displays the list of relevant ensembles.