RGMT TORPEDO Bedienungsanleitung Seite 3

PLEASE READ THE FOLLOWING
BEFORE UNSCREWING THE CROWN:
SCREW-DOWN CROWN
Screw-down crowns are used to ensure water
resistance. ALWAYS be certain that your crown is
securely screwed down ( Position [0] is secured.
Positions [1], [2] and [3] are not secured for water
resistance ).
Do NOT unscrew your crown while you are in any
environment where moisture is present.
(2nd click) (1st click)
3
2
OPENED
Not secured
For Water Resistance
1 0
CLOSED
Securely screwed
+ Water Resistance
USING THE SCREW-DOWN CROWN
DO NOT PULL THE CROWN UNLESS IT IS
0
1
NOTE: Failure to SECURELY screw down the crown
after setting the watch may affect its water
resistance.
1
FIRST:
TO UNSCREW: Turn the
crown anti-clockwise until it
turns freely without tension.
GENTLY pull the crown out to
the other desired positions for
watch setting (see specific
operating instructions on the
following pages).
TO SCREW: Push the crown
ALL THE WAY IN (towards the
watch) THEN begin to turn
clockwise until it is securely
screwed down.
2