RGMT TORPEDO Bedienungsanleitung Seite 4

HOW TO SET THE DATE AND TIME
*Before setting the time, check that the chronograph
measurement is stopped.
1. Pull out the crown to the position [2]-(1st click).
2. Turn the crown clockwise until the previous day's
date appears.
3. Pull out the crown to the position [3]-(2nd click).
when the second hand is at the 12 o'clock position.
It will stop on the spot. Set the hands to the
desired time of the day (make sure AM/PM is set
correctly) by turning the crown.
* When the crown is at the position [3]-(2nd click),
do not press any pusher. Otherwise the
chronograph hands will move.
4. Push the crown back in the position [0] in
accordance with a time signal.
* Do not set the date between 9:00 P.M. and 3:00
A.M. , otherwise the day may not change properly.
If it is necessary to set the date during the time
period, first change the time to any time outside
it, set the date and then reset the correct time.
3 4