OHAUS Valor 7000 Serie Bedienungsanleitung Seite 4

TM
Valor 7000 Series
Button Functions
On/Zero
Short Press
3
Off
Long Press
Yes Short Press (in Menu): Selects/accepts displayed setting
Print Short Press: See Interface Manual for operation description.
Units Long Press: Toggles through active weighing units
No Short Press (in Menu): Toggles through available settings
Function
Short Press: Selects function setting
Mode Long Press: Selects active Mod
Back
Short Press (in Menu): returns to previous settings
M+ Short Press: Accumulates the weight and displays the accumulated
Menu
Long Press: Enters User Menu
Exit Short Press (in Menu): Quickly exit User Menu
Tare Short Press: Enter/clear a tare value. Clears the accumulation when
The IR Sensor can be programmed to act as "touchless" buttons. See section 4.3 for the available
settings.
1
Notes: Short Press: Press less than 1 seconds.
2
Long Press: Press and hold for more than 2 seconds.
3
Press and hold the Off button until OFF is displayed, then release the button.
1
2
3
1
4
5
6
Item Description
1 NET symbol
2 Center of Zero symbol
3 Negative symbol
4 Stable weight symbol
5 Preset Tare, Tare symbols
6 Pointer symbols
7 IR Sensor symbol
8 Accumulation symbol
LED Indicators
1
(when on): Sets display to zero
(when off): Turns scale on
2
(when on): Turns the scale off
information at 0 load.
the accumulation information is displayed.
7 9
8
Valor 7000 back LCD Display
Item Description
9 Calibration / Menu Mode symbol
10 Dynamic symbol (not used)
11 Battery charge symbol
12 Pound, Ounce, Pound:Ounce symbols
13 Percent symbol
14 Kilogram, gram symbols
15 Pieces symbol, tonne symbol (both not used)
16 Scale symbol (not used)
16
15
14
13
10 11
IR Sensor (back)
EN-3
IR Senso