Futech MULTIPOWER 4.6 Kurzanleitung Seite 8

mode for most applications. For
measurement situatons requir-
ing that a range be manually
selected, perform the following:
∙ Press the RANGE-button. The
"AUTO" indicator will no longer
be shown on the display.
∙ Press the RANGE button to
step through the available
ranges until the desired range
is selected.
∙ To exit the Manual Rang-
ing mode, press and hold
the RANGE button until the
"AUTO" indicator reappears.
The range button does
not work on Frequency,
Duty Cycle, Capacitance or
Temperature.