max. 600mA
max. 10A
5.10
5.10 AC/DC Current measure-
ments
Observe all safety precautions
when working on live circuits.
Do not measure current on
circuits that exceed 1000V.
A
Measurements in the 10A range
—
+
should be limited to 30 seconds
maximum every 15 minutes.
∙ Insert the black test lead into
the negative COM input jack
∙ For current measurements up
to 600mA, set the rotary func-
tion switch to the mA position
A
—
+
and insert the red test lead into
the µA/mA input jack.
∙ For current measurements up
to 6000µA, set the rotary func-
tion switch to the µA position
and insert the red test lead into
the µA/mA input jack.
∙ For current measurements up
to 10A, set the rotary fucntion
switch to the 10A position and
insert the red test lead into the