Resistance Measurements - Futech MULTIPOWER 4.6 Kurzanleitung

5.11

5.11 Resistance measurements

Never test resistance on a live
circuit
— +
∙ Set the rotary function switch
to the Ω/ position.
∙ Press the MODE button until
the "Ω" symbol appears on the
display.
∙ Insert the black test lead into
the COM input jack and the
red test lead into the Ω input
jack.
∙ Touch the test lead probes to
the component under test. If
the component is installed in
a circuit, it is best to discon-
nect one side before testing
to eliminatie interferences with
other devices.
∙ Read the resistance on the
display.