Inhaltsverzeichnis
Werbung
The meter does not Autorange
when the Peak mode is active.
The display will read "OL" (over-
load) if the range is exceeded.
When this occurs, exit Peak and
use the RANGE button to select
a higher range. Peak does not
work on DCV, DCA, Frequency,
Duty Cycle, Capacitanceor Low
Z.
5.7 AC/DC Voltage measure-
ment
Observe all safety precautions
when working on live voltages!
Hz
%
∙ Set the rotary function switch
to the V ~Hz% position.
V
—
+
∙ Press the MODE button to se-
5.7
Werbung
Inhaltsverzeichnis
