Continuity Test - Futech MULTIPOWER 4.6 Kurzanleitung

5.12

5.12 Continuity Test

Never test continuity on a live
circuit.
∙ Set the rotary function switch
to the Ω/ position.
— +
∙ Press the MODE button until
the " " symbol appears on the
display.
∙ Insert the black test lead into
the COM input jack and the
red test lead into the Ω input
jack.
∙ Touch the test lead probes to
the component under test
∙ A beeper will sound if the re-
sistance is approximately 50Ω
or less and the resistance value
will be shown on the display.