To avoid electric shock, do not
operate meter until the battery/
fuse cover is securely fastened
to the meter.
5.17 Fuse Replacement
To avoid electric shock, remove
the test leads from the meter
before removing the battery/
fuse cover.
∙ Loosen the screws on the bat-
ter/fuse cover.
∙ Remove the battery/fuse cover
∙ Gently remove fuse and install
new fuse into the holder.
∙ Always use a UL recognized
fuse of the proper size and
value: 800mA/1000V (6.3 x
32mm) fast blow for the µA/
mA ranges and 10A/1000V
(10x38mm) fast blow for the
10A range.
∙ Reinstall the back cover and
tighten the screws.