Maintenance; Operation - Force A-Serie Bedienungsanleitung Und Teileliste

SERVICE INSTRUCTIONS
Refer to parts listing. Use only genuine Sioux replacement parts for maintenance and repair. Servicing and repairs should be performed only by trained
personnel.
HOSE AND HOSE CONNECTIONS
The air supply hose recommended is 3/8" (10mm) I.D. If an extension hose is necessary, use 1/2" (13mm) ID hose with couplings not less than 3/8"
(10mm) I.D.
LUBRICATION
All models may operate without airline lubrication. However, operating the tool without airline lubrication may reduce tool performance and vane life.
If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and
run the tool for 10-20 seconds to distribute oil through the tool.
For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is
recommended.
For Ratchet Mechanism Lubrication
Lubricate the ratchet head assembly with 2 shots of SIOUX #1232A grease every 8 working hours.
Inject grease through the voids between the ratchet head components while the tool is OFF (Do not operate the tool while applying grease).

MAINTENANCE

Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil
and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.

OPERATION

Speed of the tool may be adjusted by turning the regulator, which is located opposite the throttle lever.
Catalog
Number
*Sound Pressure (dBA)
5011 91.6
5013 91.6
Form ZCE864
Disconnect tool from air supply before installing or removing sockets or making any adjustments
NOISE AND VIBRATION READINGS
Noise* (Tested in accordance with
ISO Standard 15744)
*Sound Power (dBA)
102.5
102.5
WARNING
Uncertainty (dBA)
0.69
0.69
3
Vibration* (Tested in accordance with
ISO Standard 28927)
*Vibration m/s Uncertainty m/s
2
6.32 1.12
6.32 1.12
Date 2021August12/A
2