Intended Purpose; General Description; Extent Of The Delivery; Overview - Grizzly EKS 2440 QT Originalbetriebsanleitung

GB

Intended purpose

The electric chainsaw is constructed for
sawing wood only. The saw is not de-
signed for any other types of application
(e.g. cutting of brickwork, plastic or food).
The chainsaw is designed for employment
in the do-it-yourselfer sector. It was not
designed for continuous employment in
the commercial sector.
The device is designed for use by adults.
Young people over 16 years old may use
the chainsaw under supervision only. The
manufacturer is not liable for damages,
which were caused through use in appli-
cations for which it was not designed, or
incorrect operation.
This electric chainsaw is to be used only
by one person and only for sawing wood.
The chainsaw must be held with the right
hand on the rear handle and the left hand
on the front handle. Before use, the user
must have read and understood all of the
information and directions in the operating
instructions. The user must wear appropri-
ate personal protective equipment (PPE).
The chainsaw is to be used only for saw-
ing wood. Materials such as plastic, stone,
metal or wood containing foreign objects
(e.g. nails or screws) must not be ma-
chined!

General description

The illustration how to handle the
appliance can be found on pages
2-3.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
160
- Chainsaw
- Chain bar
- Saw chain
- Saw bar protection sheath
- 150 ml Grizzly
- Instruction Manual
Dispose of the packaging material correctly.

Overview

A 1 Rear handle
2 Oil filler cap
3 Chain brake handle, front hand
guard
4 Chain bar
5 Saw chain
6 Nose sprocket
7 Bumper
8 Front handle
9 Electric motor
10 On/off switch
11 Safety lock
12 Chain catcher
13 Chain adjustment ring
14 Fastening bolt for sprocket chain
wheel covering
15 Sprocket chain wheel covering
16 Rear hand guard
17 Cable holder
18 Mains cable
19 Saw bar protection sheath
C
20 Oil level control
21 Bar bolt
F
22 Tensioning plate
G
23 Sprocket
24 Tab
J
25 Oil passages
bio chain oil