Basic Safety Instruction; General Safety Instructions; Operating Conditions - VTI SELECT ERGO K622-24X Gebrauchsanleitung

PRESSURE REGULATOR SELECT ERGO
Operating instruction
1. Basic safety instrcutions
The safety instructions in this manual are marked as follows:
Symbol Signal word
Danger
Warning
Caution
Note

1.1 General safety instructions

DANGER
Fire and explosion hazard due to oxygen
During assembly or operation, contact with oil or grease containing substances
may occur.
• Keep the devices and connections free from oil and grease.
• Use protective caps for ports.
• Clean your hands before working on the oxygen supply.
• Do not use creams and ointments containing grease.
• Comply with local and national regulations regarding this product.
• Take damaged products out of service.
• Take products out of service, if markings are missing or illegible.
• Avoid contamination of the screw connections.
• Inspections, repair, maintenance and filling of the gas cylinder may only be carried out by
fully trained and competent personnel.
• Protect gas cylinders and the pressure regulator from sunlight, heat, UV radiation,
precipitation and other environmental influences as well as from contamination.
Major incidents must be reported to the manufacturer as well as to the competent authority
of the Member State

1.2 Operating conditions

The ambient temperature must be between -20°C and +60°C.
The storage temperature must be between -40°C and +70°C.
The relative humidity must be between 10% and 90%.
Document: 0172.14.332 Index d 2021-03-25
Meaning
Hazards with a high degree of risk.
Serious to fatal injuries to persons.
Hazards with a medium risk level.
Serious to fatal injuries of persons possible.
Hazards with a low risk level.
Minor to moderate injuries to persons.
Note or tip for a function.
21