Getting Started - Lindemann LIMETREE BRIDGE II Bedienungsanleitung

GETTING STARTED

• You need a network router with the latest firmware. Ideally it
should support the 802.11a/b/g/n/ac WLAN standard as well
as WPS.
• Your internet connection should provide at least 25 Mbit/s.
• With WLAN operation the signal strength at the setup location
must be good or very good.
• You need an up-to-date smartphone or tablet with the LINDE-
MANN app installed on it. The app is available at the app store
for iOS or at Google Play for Android.
Operating the Limetree BRIDGE via the LINDEMANN app
The Limetree BRIDGE is an app-controlled audio renderer suit-
able for playing back music from all possible music sources
within your network.
For running the device you will need the LINDEMANN app. In-
stall the app on your smartphone or tablet before starting up
the device. The app is available for iOS and Android and can be
downloaded at the respective store. Important note: smart-
phone, tablet and network player as well as NAS must be
logged on to the same network.
The app is a comfortable and well-designed remote control
for the Limetree BRIDGE to control all functions of the device.
Playback software such as Roon or Spotify Connect use a di-
rect control for the Limetree BRIDGE. The LINDEMANN app
is only required then for maintenance purposes (updates,
factory reset, network settings) and for the
device settings (maximum sampling rate at
the output, re-sampling mode).
EN 23

Top