Getting Started - Lindemann LIMETREE NETWORK II Bedienungsanleitung

26 EN EN

GETTING STARTED

• You need a network router with the latest firmware. Ideally it
should support the 802.11a/b/g/n/ac WLAN standard as well
as WPS.
• Your internet connection should provide at least 25 Mbit/s.
• With WLAN operation the signal strength at the setup location
must be good or very good.
• You need an up-to-date smartphone or tablet with the LINDE-
MANN app installed on it. The app is available at the app store
for iOS or at Google Play for Android.
Operating the Limetree NETWORK via the LINDEMANN app
The Limetree NETWORK is an app-controlled audio ren-
derer suitable for playing back music from all possible music
sources within your network.
For running the device you will need the LINDEMANN app.
Install the app on your smartphone or tablet before starting
up the device. The app is available for iOS and Android and
can be downloaded at the respective store. Important note:
smartphone, tablet and network player as well as NAS must
be logged on to the same network.
The app is a comfortable and well-designed remote control
for the Limetree NETWORK to control all functions of the
device.
Playback software such as Roon or Spotify Connect use a
direct control for the Limetree NETWORK. The LINDEMANN
app is only required then for maintenance
purposes (updates, factory reset, network
settings) and for the device settings (filter,
balance, headphone level).

Top