Purpose; Safety; National Usage Restrictions; To Prepare The Installation - CTEK DAISY Bedienungsanleitung

Purpose

This manual explains how to install the daisy chain kit (art� no 40-467), to enable support
for daisy chaining of power and ethernet connection for Chargestorm Connected series�
This kit is compliant with pole mount kits 922-00018 and 922-00019�

Safety

• Only an accredited electrician is allowed to perform the installation described in
this document�
• Read and obey the instructions in this document before installation and operation
of the product�
• Installation must fulfil local safety regulations�
• Use safety shoes during the installation�

National usage restrictions

Some countries, states or provinces have other electrical codes and standards than
stated in this manual� The installation and usage of the product shall follow local reg-
ulations� The product is intended for use by general public� The product is intended for
locations with both restricted access and non-restricted access�
This product is only allowed for use in the following regions: CZ, DE, DK, GR, ES, FI, FR, IS,
NL, NO, PL, SE, UK, AT, BE, CY, IE, LU and MT�

To prepare the installation

• Prepare and mount internal power wires and the ethernet cable of the Chargestorm
Connected series before attaching to the daisy chain kit�
• Make sure that the holes are drilled correctly� Refer to the manual for Chargestorm
Connected 2�
CTEK E-Mobility AB 3