Memory Recall; Delating The Memory - visomat Handy CL Gebrauchsanleitung

C

7. Memory recall

The device has a memory which makes it possible
to display the last 30 blood pressure levels and
pulse values measured and to indicate the mean
(average). If you press the Memory button, the mean
value will appear provided 2 measurements have
already been saved. The mean is indicated by „A"
and the number of results saved.
Pressing again calls up the last value measured.
Pressing again displays the previous measurement
as the case may be. In this way you can call up all 30
measurements backwards. If more than 30 measure-
ments have been saved, the oldest measurement
(no. 30) is deleted in order to record the latest
measurement (no. 1). If the button is pressed again,
the mean of all the measurements appears.
GB-44
Operation of the device
Record the figures saved in your blood pressure
pass. Over a lengthy period this will provide you with
a better picture of your blood pressure situation,
which you may wish to discuss with your doctor.
8. Deleting the memory
To delete individual measurements, press the
Memory button a number of times to call up the
measurement required, press again and keep the
button pressed for 8 - 10 seconds . The figures will
flash 4times, then the measurement is disappeared.
To delete the entire memory, call up the mean, press
the Memory button again and keep it pressed until
the mean has disappeared (8-10 sec).