Operation Of The Device; Setting Up The Device; Fitting The Cuff - visomat Handy CL Gebrauchsanleitung

C

1. Setting up the device

Place the enclosed batteries in the device if they
have not already been inserted (see page 48,
Changing batteries).

2. Fitting the cuff

Bare your left wrist, remove any watch or jewel-
lery. Place the device round the wrist. The distance
between the top edge of the cuff and the palm should
be approx. 1 cm.
Left-handed persons can place the cuff round their
right arm. The instructions for use apply by analogy.
Now pull the free end of the cuff tight and place it
over the velcro strip firmly. Owing to its optimised
shape the cuff sits tightly in order to prevent any
measuring errors.
GB-38

Operation of the device

Important:
Never use the device above a critical part of the body
(e.g. wound, intravascular port etc.).