visomat Handy CL Gebrauchsanleitung Seite 37

Abridged instructions on measurement
3. Inflate the cuff
Press the Start/Stop button. The device conducts a
performance test and all the display elements light
up. Inflation of the cuff is automatic up to approx.
190 mmHg. If cuff pressure is too low, the device
automatically increases the pressure in increments of
approx. 40 mmHg.
4. Blood pressure measurement
After inflation the air is let out automatically, the
falling cuff pressure is displayed and the „♥" symbol
flashes and a beep sounds. Automatic deflation
of the cuff indicates the end of measurement. The
systolic and diastolic blood pressure readings will
appear in the display together with your pulse rate
5. Switch off the device
Press Start/Stop button. The figures measured are
saved automatically.
B
GB-37