Metrological Inspection - visomat Handy CL Gebrauchsanleitung

Appendix
• This product conforms to Council Directive 93/42/
EEC of 14 June 1993 on Medical Devices.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim
Germany
Important:
No changes may be made to this device without the
manufacturer's permission, e.g. the device must not
be opened (except to change the batteries).

4. Metrological inspection

(previously calibration)
Generally, a metrological inspection is to be
recommended at intervals of 2 years. Professional
users in Germany, however, are under obligation
in accordance with the „Medical Devices Operator
Ordinance". The inspection can be performed either
by UEBE Medcial GmbH, an authority responsible
for metrology or authorised maintenance service
centres. Competent authorities and authorised
maintenance service centres can obtain a „Test
Procedure for Metrological Inspections" from the
manufacturer on request. Thereto please note your
national guidelines.
G
GB-55