Memory Recall; Memory Deletion - visomat handy IV Gebrauchsanleitung

Display unit operation
Please wait 3 minutes before taking a
new measurement.
6. Memory recall
The device is equipped with a memory
which is able to show the last 30 values
of the blood pressure and pulse measure-
ments as well as an average value.
When the memory button is pressed, the
average value appears first (as far as 2 va-
lues are stored). When the memory button
is pressed again the last measured value
(no. 1) appears. After pressing the button
a third time the second latest memory (no.
2) appears, and so on.
With this procedure all 30 memories can
be recalled. Finally, another pressing of the
memory button recalls the average of all
measured values.
After the 30th measurement, the oldest
measurement will be deleted and the
latest measured value will be memorised.
7. Memory deletion
Single memorized values can be deleted
when the memory button is pressed seve-
ral times until the wanted value appears .
When the button is pressed 4 seconds the
value will be deleted. To delete the com-
plete storage the memory button must be
pressed until the display is blank (7-8 sec).
C
GB-43