i-tec CAHDMIDVIDOCKPRO Gebrauchsanweisung Seite 9

INSTALLING DRIVERS ON MACOS X
WARNING! Do not connect the dock to your Mac until you have installed the
appropriate drivers. You only need to install the drivers before using it for the first
time. We recommend that you have the latest macOS operating system installed.
Download the drivers from our website www.i-tec.pro under the "Download" tab
for this product and start the installation:
Extract the file to your MacBook desktop as a virtual disk, select "Drivers" and
then "DisplayLink Software Installer". Then select your installation language and
follow the on-screen instructions, entering your user password if necessary. The
screen may flicker during driver installation, this is a standard process. When the
installation is complete, restart your MacBook.
HARDWARE INSTALLATION (CONNECTING THE DOCK TO THE MACBOOK)
1. Turn on your MacBook and connect the power adapter to the dock.
2. Plug the docking station power adapter into a 110V/230V AC outlet and
press the ON button.
3. Plug the USB-C to USB 3.0 cable or USB-C to USB-C cable into the USB-C
port on the back panel of the dock.
4. Plug the other end into an available USB 3.0 / USB-C port on your MacBook.
5. The automatic installation of the ports will then begin.
6. When the installation is complete, restart your MacBook.
The installed ports are shown in macOS X as "LAPDOCK" in "About This Mac" →
"System Profiler" → "Hardware" → "USB".
INSTALLING DRIVERS ON OTHER OPERATING SYSTEMS
For Android, Chrome OS and Ubuntu, use the drivers from the DisplayLink chipset
manufacturer. These can be downloaded from our website www.i-tec.pro under the
"Download" tab for this product or here: http://www.displaylink.com/downloads.
HDMI / DVI / VGA MONITOR CONNECTION
Use an HDMI / DP cable to connect the monitor to the docking station. The
monitor on the laptop/tablet may flicker during installation of the additional
monitor, which is a standard condition. The docking station supports the
connection of up to two monitors. Graphics interface: 1x HDMI and 1x DVI. VGA
can be connected using a DVI-VGA adapter.
Manual EN
9