Disassembly Of The Lower Rail (D); Installation Of The Rails Onto The Tv - ONKRON TS1220 Benutzerhandbuch

3. Disassembly of the lower rail (D):

• Use a wrench (J) to take off a screw on the clamp of the lower rail (D).
The clamp must open easily.

4. Installation of the rails onto the TV:

4.1 Put your TV with the screen side on a flat surface, you can also use a
soſt cloth to protect the screen. Install rail (C) in the upper holes of the
TV, using suitable bolts (M-A), (M-B), square washer (M-F), through
spacer (G). This spacer (G) will be used with the safety cable. Look at the
picture below:
M-A
G
M-F
4.1
M-A
M-F
4.2
4.2 Install the rail (D) in the lower holes of the TV, using suitable screws
(M-A), (M-B) and the square washer (M-F).
D
M-B
G
M-F
4.1
M-B
M-F
4.2
J
C
D
TV TV
TV
TV TV
5