Tripod Assembly; Adjusting Of The Locking Clamp - ONKRON TS1220 Benutzerhandbuch

1. Tripod assembly:

• Take three legs (x2 A, x1 B) and twist them into the main pole (E), as
shown on the picture:
Twist the legs tightly, make sure they adjoin the triple socket.
All three legs must be twisted in completely, with no free
space between the socket and the legs. Do not overtighten the
screws of the legs, it may damage the legs or/and the socket.

2. Adjusting of the locking clamp:

• Put the locking clamp on the main pole. Recommended distance
between the upper part and the locking clamp 1.97" – 5.9" (50-150
mm). Tighten the screw using key (J).
Make sure the locking clamp is securely fixed, before installing
the TV.
4
E
J
A
B
A
1,97"- 5,9"
(50-150 mm)