Warranty; Property Rights / Trade Names And Disclaimer - Rohde Ecotop 20 Bedienungsanleitung

10. WARRANTY

We guarantee excellent manufacturing and functionality of the kiln and provide a 36-month warranty from date of
invoice�
As well as the heating elements (subject to wear) the following are excluded from the scope of warranty:
• Damage caused by the customer such as broken bricks on the cover caused by placing objects on top of the kiln�
• Damage caused by the fired material, e�g� due to temperature limits being exceeded�
• Damage caused by improper transport�
• Damage due to chemical reactions during firing for which the kiln is not intended (such as salt glaze)�
• Corrosion caused by aggressive glazes or insufficient ventilation of the firing chamber� The manufacturer is not liable
for any damage resulting from improper operation and resulting damages�
Important: Please fill in the GUARANTEE CARD and send it back immediately! Please note: If you do not send back
the Guarantee Card, we will not be able provide quick, free support in an event of damage�
PLease note: The firebricks of the kiln lining are exposed to significant temperature fluctuations� This may cause
hairline cracks in the firebrick lining� This process is common and does not affect the functionality of the kiln� It cannot
therefore be accepted as a reason for complaint�
What to do in the case of warranty / damage:
Please notify us - before incurring any costs� After contacting the manufacturer, Helmut Rohde GmbH, your retailer
will then decide how to proceed�
If any claims arise, please state the kiln type, product number and the date of purchase or the year of construction
(see type plate on switch cabinet)�
We refer to the General Terms and Conditions (dated 04/2014) of Helmut Rohde GmbH.

11. PROPERTY RIGHTS / TRADE NAMES AND DISCLAIMER

The contents of the instruction manual are purely informative� Changes may be made without prior notice and may
not be seen as a liability of Helmut Rohde GmbH� We do not guarantee or accept responsibility for the correctness
or precision of the contents in this instruction manual�
We mention names, trade names, product identifications etc� without special identification, as they are generally
known� Those names and identifications, however, may be the property of companies or institutions and subject to
copyright�
Level: 10 / 2020
Brennöfen und Maschinen für Keramik, Glas und Metall
SN:
Modell / Model:
TE 95 S # 32694
Spannung / Voltage: Strom / Current:
3/N/PE AC 400 V
16 A
Maximale Betriebstemperatur /
Maximum operating temperature: 1320 °C
Helmut Rohde GmbH
Ried 9
D - 83134 Prutting
Baujahr / Y. O. M.:
01 / 2013
Leistung / Power:
7,3 kW
Frequenz:
50 Hz
CE
13
Page of 16