Important Safety Instructions; General Information; General Safety Instructions; Operating Safety Instructions - Rohde Ecotop 20 Bedienungsanleitung

4. IMPORTANT SAFETY INSTRUCTIONS

4.1. General information

Please make sure that you fully understand both the safety instructions and the safety icons, in order to eliminate
potential dangers� Before starting to operate the kiln, make sure that you read and fully understand the following
safety instructions�
Keep your instruction manual available at all times� For your own safety only use original spare parts!
Helmut Rohde GmbH does not assume any liability for damage resulting from incorrect or defective heating elements
from other manufacturers� Use only original spare parts - otherwise all warranty claims become void�

4.2. General safety instructions

Caution: Hot surface�
Do not open while hot�
Caution: Disconnect power plug
before opening the switch box!

4.3. Operating safety instructions

The ROHDE kiln can only be operated safely if the safety instructions are carefully followed:
• When operated industrially, the kiln and controller must undergo a safety check to ensure correct functionality� This
should be carried out by a qualified electrician before the initial operation and then at 4-year intervals in accordance
with DGUV Regulation 3 (Deutsche Gesetzliche Unfallversicherung / German Social Accident Assurance)�
• Maintenance and repair of electronic components must be carried out by a qualified electrician�
• For safety reasons the kiln must be disconnected from the mains supply before any maintenance work is carried
out�
• The kiln must not be operated with an extension cable!
Level: 10 / 2020
Caution: Dangerous electrically live
components�
The CE marking indicates that the
inspections for conformity have
been correctly carried out in accor-
dance with EC standards:
Directive 2004/108/EC
Directive 93/68/ECC relating to CE
marking�
Page
5
of 16