Maintenance And Service; Maintenance And Cleaning; Français; Consignes De Sécurité - Bosch GHO 40-82 C Professional Originalbetriebsanleitung

16 | Français
Carry out the planing procedure several times until the de-
sired rebate depth has been achieved. Guide the planer with
sideways contact pressure.
Chamfering with angle guide
Use the angle setting (25) to
set the necessary helix angle
when chamfering grooves
and surfaces.
Planer blade/key compartment
In the planer blade/key compartment (3), you can store a
planer blade (16) and a hex key (18) as shown in the illus-
tration. To remove the compartment contents, pull the
planer blade/key compartment (3) completely out of the
planer.
(3)
Service station (see figure I)
The service station (29) in the case can be used as a mount-
ing fixture for the planer, e.g. for changing the blade.
Do not use the service station for stationary operation
u
of the planer.

Maintenance and Service

Maintenance and cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Keep the parking rest (28) clear and clean it regularly.
When the carbon brushes are worn out, the power tool
switches itself off. The power tool must be sent to the after-
sales service for maintenance; see the "After-Sales Service
and Application Service" section for addresses.
1 609 92A 64U | (20.11.2020)
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
(18) (16)
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l'outil
électrique
MENT
avec cet outil électrique. Ne pas suivre les instructions
énumérées ci-dessous peut provoquer un choc électrique,
un incendie et/ou une blessure sérieuse.
Autogoods "130"
Do not dispose of power tools along with
household waste.
Lire tous les avertissements de sé-
AVERTISSE-
curité, les instructions, les illustra-
tions et les spécifications fournis
Bosch Power Tools