Transport Over Shorter Distances; Lifting And Transporting With Separate Devices - Zipper Maschinen ZI-RPE60 Betriebsanleitung

18 TRANSPORT
Never lift or transport the machine with the engine running!

Transport over shorter distances

For transport over short distances, use the hand holder and the mounted transport wheels:

Lifting and transporting with separate devices

There are two persons required to lift and park the machine on another transporting devices.
- one person to operate the hoist and one person to keep the machine in balance.
19 STORAGE
If the machine is not used for a longer period of time (>30 days):
1. Empty the oil tanks or fuel tank.
2. Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a
rope starter, turn the engine a few times so that the oil is well distributed inside the
cylinder. Clean the spark plug and replace it.
3. Cover the cooled machine and store it out of the reach of children and unauthorised
persons in a well-ventilated, dry and frost-free environment.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE60 ZI-RPE9042
W A R N I N G
1.
2.
3.
1. When transporting over long distances, fold the handle forward
as far as possible (see illustration on the left).
2. Ensure that the lifting equipment, including accessories, is
suitable for loads greater than 90 kg.
3. Before lifting, check the weld on the lifting ring and the fixing of
the lifting frame.
4. First lift the machine only a few centimetres to check the load
capacity.
5. Then lift the machine as gently as possible into the desired
position.
6. Secure the load properly for transport.
Release the transport wheels from the rubber holder
and support the wheel axle on the ground.
Pull the machine backwards until the base plate rests
on the rubber supports of the wheel suspension.
Press the handle vertically until the centre of gravity of
Move the machine only on level and firm ground.
N O T I C E
TRANSPORT
42