Troubleshooting; Warranty - Cole Parmer Stuart SA6 Bedienungsanleitung

Troubleshooting

Vortex action
Partially working
(stops in between).
Not working at all
(completely stopped).
Continuously working
(running without
being pressed).
Note: Please contact your recognised Cole-Parmer service representative if you continue to experience
issues with your Stuart Mini Vortex Mixer.

Warranty

Cole-Parmer Ltd. warrants this instrument to be
free from defects in material and workmanship,
when used under normal laboratory conditions,
for a period of three (3) years. In the event of a
justified claim Cole-Parmer will replace any
defective component or replace the unit free of
charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
incorrect installation, adaptation, modification,
fitting of non approved parts or repair by
unauthorised personnel.
4
Problem
Small screw on the
bottom might
have loosened.
Small screw on the
bottom might
have loosened.
Small screw on the
bottom might have
been overtightened.
Solution
Tighten the small
screw a little
(½ or 1 turn max.).
Tighten the small
screw a little
(1 or 2 turns max.).
Loosen the small
screw a bit
(1 or 2 turns max.).
Troubleshooting
Small screw
Small bottom
screw at the base
at the base
of device
of device
Note: Please contact your recog
continue to experience issues w
Warranty
Bibby Scientific Ltd warrants thi
workmanship, when used unde
years. In the event of a justified
component or replace the unit
This warranty does NOT apply if
incorrect adjustment or repair, d
modification, fitting of non app
Technical Specification
Type of Movement
Shaker Diameter
Tube Diameter
Permissible Shaking Weight
Maximum Speed
Variable Speed
Operation Type
Dimensions (L x W x H)
Weight
Vo
Pa
(st
No
(co
sto
Co
wo
wi
pre