Connecting To The Network - NEFF T18TS2KN-Serie Gebrauchsanleitung

Home Connect
en
Deactivating WLAN
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
Touch the symbol for 4 seconds.
U
1.
The product information will be displayed.
Touch the U symbol repeatedly until the
2.
setting appears.
•'„
will be lit on the hotplate display.
‚
Set the value to using the twist knob.
‹
3.
This deactivates Wi-Fi; the
control panel.
Disconnecting from the network
Y ou can disconnect your hob from the network at any
D i s c o n n e c t i n g f r o m t h e n e t w o r k
time.
Note: If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
Touch the symbol for 4 seconds.
U
1.
The product information will be displayed.
Touch the symbol repeatedly until the
U
2.
setting appears.
•'‚
will be lit on the hotplate display.
„
Set the value to ‹ using the twist knob.
3.
This disconnects the appliance from your home
network; the D symbol will go out on the control panel.

Connecting to the network

Touch the symbol for 4 seconds.
U
1 .
C o n n e c t i n g t o t h e n e t w o r k
The product information will be displayed.
Touch the symbol repeatedly until the
U
2.
setting appears.
•'‚
will be lit on the hotplate display.
‹
Using the twist knob,
3.
set the value , "Connect automatically", or
‚
the value , "Connect manually".
ƒ
64
symbol will go out on the
D
Follow the instructions in the section entitled
4.
"Automatic login to your home network" or
"Manually logging into your home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 64
Touch the symbol for 4 seconds.
U
1.
The product information will be displayed.
Touch the symbol repeatedly until the
U
2.
•'ƒ setting appears.
will be lit on the hotplate display.
‹
Set the value to using the twist knob.
‚
3.
Follow the instructions in the app to complete the
4.
connection process.
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
hotplates to the hob.
Notes
Before you can change the basic settings, the hob
■
must be switched off.
If the appliance is being operated by means of the
■
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
When the appliance is delivered, the settings
■
transmission option is already activated by default.
If the settings transmission option has been
■
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
Touch the U symbol for 4 seconds.
1.
The product information will be displayed.
Touch the symbol repeatedly until the
U
2.
setting appears.
•'...