Home Connect; Setting Up - NEFF T18TS2KN-Serie Gebrauchsanleitung

Home Connect

en
oHome Connect
N ote: Home Connect is due to be introduced for NEFF
H o m e C o n n e c t
from the end of 2018.
This appliance is WLAN-enabled and settings can be
sent to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information on this at
www.home-connect.com.
Notes
Hobs are not designed to be used unattended - you
■
must always keep an eye on the cooking process.
Ensure that you follow the safety instructions in this
■
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 51
Using the Home Connect app, you can send settings
■
to your appliance and then have to confirm them on
the appliance. It is not possible to operate the
appliance whilst you are away from home.
Operation on the appliance always has priority.
■
During this time, it is not possible to operate the
appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manually logging into your
home network".
Switch on the hob.
1.
Touch the symbol for 4 seconds.
U
2.
The product information will be displayed.
Touch the symbol repeatedly until the
U
3.
setting appears.
•'‚
62
will be lit on the hotplate display.
‹
Set the value to ‚ using the twist knob.
4.
and the symbol will flash on the hotplate
‚ D
display.
Press the WPS button on the router within the next
5.
2 minutes.
Once the symbol stops flashing and remains lit
D
continuously on the hotplate display, the hob is
connected to your home network.
Note: If a connection cannot be established, the
value ƒ , "Connect manually", will appear.Log the
appliance into your home network manually or try
connecting automatically again.
The appliance will automatically try to connect to the
app; the setting will appear. The value
•'ƒ
flash in the settings area.
On your mobile device, follow the instructions in the
6.
app for automatic network login.
Once the value appears on the hotplate display, the
‹
login process is complete.
Manual registration in the home network
Switch on the hob.
1.
Touch the symbol for 4 seconds.
U
2.
The product information will be displayed.
Touch the symbol repeatedly until the
U
3.
setting appears.
will be lit on the hotplate display.
‹
will
‚
•'‚