Residual Heat Indicator; Twist-Pad With Twist Knob; Removing Twist Knob; Storing The Twist Knob - NEFF T18TS2KN-Serie Gebrauchsanleitung

Twist-Pad with Twist knob

en
Combination cooking zone
1 = dual-circuit hotplate
2 = single-circuit hotplate
3 = bridge heating element
The single and dual-circuit hotplate can be operated
without the bridge heating element independently of
each other or combined with the bridge heating
element as described in the table.
Combination Activation
Small roasting Select dual-circuit hotplate.
zone:
With the
Combination of 1
vate the outer filament cir-
+ 3
cuit. ð display is lit.
With the
vate the bridge heating ele-
ment. ç display is lit.
Large roasting
Touch the
zone:
play is lit.
Combination of 1
+ 3 + 2
The small roasting zone (1 + 3) and the single-circuit
hotplate (2) can also be operated independently of
each other with different heat settings. Different
temperature ranges are therefore generated at the large
roaster, the teppan yaki or the grill plate, for example:
the small roasting zone can then be used to fry a meal
and the single-circuit hotplate can simultaneously be
used to keep a meal warm.
Note: Suitable cookware is available from the after-
sales service or our e-Shop.

Residual heat indicator

The hob has a two-stage residual heat indicator for
each hotplate.
If appears in the display the hob is still hot. It may be
•
used, for example, to keep a small meal warm or to
melt cooking chocolate. As the hotplate cools down
further, the display changes to
until the hotplate has cooled sufficiently.
54
Suitable for
Small roaster
Small teppan yaki
ð symbol acti-
ð symbol acti-
Large roaster
Õ symbol. u dis-
Large teppan yaki
Large grill plate
œ . The display remains lit
jTwist-Pad with Twist knob
T he twist pad is the area in which you can use the twist
T w i s t - P a d w i t h T w i s t k n o b
knob to select hotplates and set heat settings. The twist
knob automatically centres itself in the twist pad area.
The twist knob is magnetic and is placed on the twist
pad. Tapping the twist knob next to a mark on the twist
pad activates the relevant hotplate. Turning the twist
knob selects the heat setting.
Note: Always keep the twist knob clean.Dirt may impair
its performance.

Removing twist knob

You can remove the touch knob. This makes cleaning
easier.
You can also remove the twist knob while the hotplate
is on. The wipe protection function is activated and the
hob switches off after 35 seconds.
Notes
The main switch is excluded from the wipe
■
protection function. You can switch off the cooktop
at any time.
If you mount the twist knob again and then turn it, the
■
wipe protection function will be switched off.
:
Warning – Risk of fire!
If you place a metallic object onto the twistpad, the
cooktop may continue to heat up. Always switch off the
cooktop using the main switch for this reason.

Storing the twist knob

The twist knob contains a strong magnet. Keep the twist
knob away from magnetic data carriers, such as video
cassettes, diskettes, credit cards or cards with
magnetic strips. Otherwise they may be damaged
beyond repair. They can also cause interference in
television sets and monitors.
:
Warning – Hazard due to magnetism!
For wearers of electronic implants, e.g. pacemakers or
insulin pumps. Implants may be affected by magnetic
fields. You should therefore never carry the twist knob in
a pocket. They must be kept at least 10 cm from
pacemakers.
Note: The twist knob is magnetic. Metal particles which
stick to the underside can scratch the ceramic hob.
Always wipe the twist knob thoroughly.