Frying Sensor; Pans For The Sensor Frying System; The Frying Settings; Setting The Frying Sensor System - NEFF T18TS2KN-Serie Gebrauchsanleitung

cFrying Sensor
T he dual-circuit hotplate marked with the
F r y i n g S e n s o r
has a sensor frying system function. If you operate the
hotplate with the sensor frying system, a sensor
regulates the temperature of the pan.
Your advantage when frying:
The hotplate only heats up when necessary. This will
■
save energy.
Oil and fat do not overheat.
■
Notes
Never leave fat unattended while you are heating it.
■
Put the pan in the centre of the hotplate. Make sure
■
that the base of the pan has the correct diameter.
Do not place a lid on the pan, otherwise the
■
regulator will not work. You can use a splatter guard;
it will not prevent the regulator from working.
Only use fat that is suitable for frying. For butter,
■
margarine, extra virgin olive oil or lard, select the
frying setting 1 or 2.

Pans for the sensor frying system

Select the right pan when using the sensor frying
system.
System pans as optional accessories
You can buy a frying pan that is perfectly suited to frying
with the sensor cooking system from your specialist
electrical retailer or from www.neff­eshop.com: Z9453X0
Both availability and whether it is possible to order
online differ between countries.
The frying settings given below have been adjusted to
the system pans.
Note: The sensor frying system may also work with
other pans. Test the pans first with low frying settings,
changing as necessary. The pans may overheat on high
frying settings.

The frying settings

Frying Temperature Suitable for
setting
1 very low e.g. cooking and reducing sauces, steam-
ing vegetables without adding water and
with added fat, frying food with extra vir-
gin olive oil, butter or margarine
2 low e.g. omelettes, frying food with extra virgin
olive oil, butter or margarine
3 low - medium e.g. frying fish, thick food such as rissoles
and sausages
4 medium - high e.g. frying steak medium or well done, fro-
zen breaded products, thin food such as
escalopes, strips of meat and vegetables
5 high e.g. frying steak rare, potato fritters and
fried potatoes

Setting the frying sensor system

Select the appropriate frying setting from the table.
Place the frying pan on the hotplate.
symbol
Û
The hob must be switched on.
Select the hotplate.
1.
2.
The
reached. Then an audible signal will sound. The
symbol will be lit.
3.
Turn as you normally would to prevent burning.

Switching off the sensor frying system

Touch the

Frying table

The table shows which frying setting is suitable for
which dish. The frying time may depend on the type,
weight, thickness and quality of the food.
The frying settings given are for the system pans. The
frying settings may vary if you use different pans.
First heat the empty pan. Only add the food with the fat
to the pan when the signal sounds.
Meat
Escalope, plain or breaded
* Turn frequently
** Place in a cold pan
Touch the symbol.
Û ‹
display and the symbol will appear.
Û
Turn the twist knob to select the frying setting you
require. The frying sensor system is now
activated.The large two-ring hotplate has been
switched on automatically.
symbol will flash until the frying temperature is
Û
Add the fat and then the food to the frying pan.
Û symbol.

Frying Sensor

will be lit on the hotplate
Û
Frying Total frying time after
setting the signal sounds
4 6-10 min
en
57