Scope Of Delivery; Intended Use; Device Description - Scheppach S700 Originalbetriebsanweisung

GB
1. Introduction
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified.
We recommend:
Read through the complete text in the operating
instructions before installing and commission-
ing the device. If you give the equipment to any
other person, give them these operating instructions
as well. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine. In addition to the safety
regulations in the operating instructions, you have
to meet the applicable regulations that apply for the
operation of the machine in your country. Keep the
operating instructions package with the machine at
all times and store it in a plastic cover to protect it
from dirt and moisture. Read the instruction manual
each time before operating the machine and care-
fully follow its information. The machine can only be
operated by persons who were instructed concerning
the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with.

2. Device description

1. Sliding handle
2. Height adjustment sliding handle
3. Mounting screw sliding handle
4. Dirt collecting container
5. Central height adjustment
6. Feeder brushes
7. Belt drive
8. Sweeping brushes
10 / 28
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

3. Scope of delivery

• After unpacking, check all parts for any transport
damage. Inform the supplier immediately of any
faults. Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize yourself
with the machine by carefully reading these in-
structions.
• Use only original scheppach accessories, wearing
or replacement parts. You can find replacement
parts at your scheppach dealer.
• When ordering, include our item number and the
type and year of construction of the machine.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There i s a risk of
swallowing and suffocation!

4. Intended use

• The machine is designed and built according to the
state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve
risks such as personal injury, danger to life for the
user or third parties, or damage to the machine and
other material property.
• The machine is to be used only in a technically
flawless condition as well as in accordance with
the manufacturer's instructions and in a safety and
risk-conscious manner while adhering to the oper-
ating instructions! In particular, failures which may
impair the safety must be resolved immediately (by
you or an expert)!
• Sweeping of flat and dry surfaces – e.g. entries,
terraces, courtyards, etc.
• The machine may be operated only with original
parts and original accessories of the manufacturer.
• Any other use above or beyond this is considered
improper use. The manufacturer is not liable for
damages resulting from this. The user shall bear
this risk alone.
• The safety, work and maintenance instructions of
the manufacturer as well as the dimensions indicat-
ed in the Technical Data section must be adhered
to.
• The relevant accident prevention regulations and
other generally recognised safety standards must
be observed.
• The machine may be used, maintained or repaired
only by persons who are familiar with the machine
and the risks involved. Unauthorised modifications
on the machine exclude any liability of the manu-
facturer for resulting damages.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial ap-
plications.