Technical Data; Declaration Of Conformity - Bosch PWS 8-125 CE Originalbetriebsanleitung

OBJ_BUCH-975-002.book Page 25 Monday, July 13, 2009 5:33 PM

Technical Data

Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
09.04.2009
Bosch Power Tools
PWS 7-125 PWS 8-125 CE
3 603 C99 8.. 3 603 C99 B..
W 720
W 420
-1
min 11000
-1
min – 2800 – 11000
mm 125
M 14
mm 22
–
–
kg 2.0
/II
Assembly
Mounting the Protective Devices
Before any work on the machine itself, pull
the mains plug.
Note: After breakage of the grinding disc during
operation or damage to the holding fixtures on
the protection guard/power tool, the machine
must promptly be sent to an after-sales service
agent for maintenance (for addresses, see sec-
tion „After-sales Service and Customer Assist-
ance".
Protection Guard for Grinding
Place the protection guard 7 onto the spindle
collar of the machine until the encoding keys of
the protection guard agree with the spindle col-
lar. Press and hold the release lever 1while do-
ing this.
English | 25
PWS 9-125 CE
3 603 C99 A..
800 900
425 450
11000 11000
2800 – 11000
125 125
M 14 M 14
22 22
2.0 2.0
/II /II
1 609 929 S71 | (13.7.09)