Cleaning The Device; Overview Of Cleaning - Bosch MSGP3L Gebrauchsanleitung

Prepare the descaling solution.
1.
Add 2 teaspoons of citric acid
‒
to warm water at 50 °C.
Slowly pour the descaling solution
2.
into the plant tray.
Maximum capacity has been
reached when the light unit flashes
white twice.
Touch the touch button for
3.
15 seconds until the light unit
lights up green.
→ Fig.
25
a The pump will run for around
3 minutes.
If not all deposits have dissolved,
4.
leave the descaling solution to
work for a few more hours and
then start the pump again.

Cleaning the device

After descaling, clean all parts thor-
oughly.
Remove the light unit and the
1.
height modules.
→ Fig.
26
Remove the plant tray , the wa-
2.
tering tray
ring ⁠ .
→ Fig.
27
Remove the water bowl.
3.
→ Fig.
28
Turn the pump housing anticlock-
4.
wise and remove.
→ Fig.
29
Take out the pump impeller.
5.
→ Fig.
30
Clean all parts as indicated in the
6.
cleaning overview.
After drying re-assemble all parts
7.
in reverse order.
Note: When inserting the pump im-
peller, check that there are no
residues on or underneath the im-
peller. The pump impeller must turn
easily.
and the anti-spill
Cleaning and servicing en

Overview of cleaning

Here you will find a overview of the
best way to clean the individual com-
ponents.
→ Fig.
31
29