After Using The Appliance/Cleaning; Troubleshooting - Bosch MFQ35 Serie Gebrauchsanleitung

en

After using the appliance/cleaning

■ Insert tools into the receptacle and
switch on the appliance at the required
level.
Level 1, 2:
For working in and mixing in.
Level 3, 4, 5:
For kneading and beating.
■ After working, set the switch to P
and release and remove the tools with
the ejector button.
Caution:
The ejector button cannot be actuated
unless the switch is in the P position.
Note: Always switch off the base unit before
taking it out of the blended food.
High-speed hand blender
(depending on the model)
For blending mayonnaise, sauces, soups,
mixed drinks, baby food and for crushing
ice and cutting cooked fruit and vegetables.
Important note: When the rear aperture is
open, the appliance can be operated using
instantaneous switching only. Selector
switch 1-5 will not function. Open and close
the lock on the rear aperture only when
the switch is in position P.
X Fig. C
■ Push up the lock on the rear aperture
until it locks into position.
■ Insert the high-speed hand blender and
lock into position.
■ Put the food in the blender jug.
■ Move the switch to the left to
instantaneous switching and hold
in place.
■ After working, remove the high-speed
hand blender by simultaneously
pressing both release buttons.
■ Close the lock on the rear aperture.
12
Note: To prevent the food from splashing,
first immerse the high-speed hand blender
into the food, then switch on the appliance.
After using the appliance/
cleaning
Important note: The appliance is main-
tenance-free. Thorough cleaning protects
the appliance from damage and keeps it
functional.
Caution!
Never immerse the base unit in water and
do not clean in the dishwasher. Do not
steam-clean the appliance!
■ Pull out the mains plug.
■ Wipe the base unit with a damp cloth
and then wipe dry.
■ Clean the tools and high-speed hand
blender in the dishwasher or with
a brush under running water.
Note: when processing food such as red
cabbage, the plastic parts may become
discoloured, however this can be removed
with a few drops of cooking oil.
The power cord can be wound up to facili-
tate storage of the appliance (see Fig. D).

Troubleshooting

Fault:
Switch cannot be moved to Levels 1 to 5.
Remedy:
When the rear aperture is open, the selec-
tor switch will not function between Levels 1
and 5. The lock must be completely closed.