Maintenance - Force A-Serie Bedienungsanleitung Und Teileliste
Vorschau ausblenden
Andere Handbücher für A-Serie:
- Bedienungsanleitung und teileliste (37 Seiten) ,
- Bedienungsanleitung und teileliste (37 Seiten) ,
- Bedienungsanleitung und teileliste (29 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
HOSE AND HOSE CONNECTIONS
The air supply hose recommended is 3/8" (10mm) I.D. If an extension hose is necessary, use 1/2" (13mm) ID hose with couplings not less than 3/8" (10mm) I.D.
LUBRICATION
For maximum performance and tool life, an air line lubricator, set to deliver 2 drops per minute, is recommended. SIOUX No. 288 Air Motor Oil is recommended.
If an airline lubrication is not used, it is recommended that the tool be oiled daily before use to improve performance. Add 2-4 drops of air motor oil and run the
tool for 10-20 seconds to distribute oil through the tool. Lubricate the gears through the grease fitting with Sioux 1232A grease after 100 hours of operation.
MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few drops of oil and
run for 10 seconds. This will help remove contaminants and reduce the formation of rust. Check the speed of the tool regularly by placing a contact type
tachometer to the chuck. In addition, always check the speed and do a simple vibration check after any servicing. If the tool exceeds the rated speed or
vibrates excessively discontinue use and contact an Authorized Sioux Service Center. Avoid exposure to hazardous substances deposited on the tool.
Speed
Catalog No.
(RPM)
5440C
2600
5440CKL
2600
5445CR
2000
5445CRKL
2000
5450CR
800
5450CRKL
800
5434C
2500
5434CKL
2500
5430C
1400
5430CKL
1400
Form ZCE862
Disconnect tool from air supply before installing or removing drill bit or making any adjustments
NOISE AND VIBRATION READINGS
Weight
lbs.
kg
2.2
1.0
2.2
1.0
2.2
1.0
2.2
1.0
2.9
1.3
2.9
1.3
2.2
1.0
2.2
1.0
2.6
1.2
2.6
1.2
WARNING
Noise (Tested in accordance with ISO
Standard 15744
Chuck Thread
Sound
Soud Power
Pressure
(dBA)
3/8-24 UNC
87.1
3/8-24 UNC
87.1
3/8-24 UNC
90
3/8-24 UNC
90
3/8-24 UNC
89
3/8-24 UNC
89
3/8-24 UNC
83.2
3/8-24 UNC
83.2
3/8-24 UNC
87
3/8-24 UNC
87
3
Vibration (Tested in
accordance with
ISO Standard 28927)
Uncertainty
Vibration
(dBA)
(dBA)
(m/s
2
98.1
3.0
1.9
98.1
3.0
1.9
101
3.0
2.1
101
3.0
2.1
100
3.0
1.5
100
3.0
1.5
94.2
3.0
1.8
94.2
3.0
1.8
98
3.0
2.73
98
3.0
2.73
Date
Uncertainty,
K
)
(m/s
)
2
0.68
0.68
0.71
0.71
0.65
0.65
0.67
0.67
0.77
0.77
2021May19/A
Werbung
Inhaltsverzeichnis
