Pioneer SGX-CA900 Schnellstartanleitung Seite 18

EN
Basic Operation
1
Mount the sensors on your bike.
For details about how to mount sensors,
refer to the user's manual of your
sensors.
2
Press the
on the main screen of the
CycloMeter.
3
Tap [Sensors] - [Connect New].
4
Enter your sensors' information.
Tap [Device Type] to select the type of
sensor(s) you wish to pair.
Types of compatible sensors:
• SpeedSensor
• CadenceSensor
• Speed & Cadence Sensor
• Heart Rate Monitor
• PowerMeter
• Pedaling Monitor L
• Pedaling Monitor R
5
Tap [Search].
The message "Searching Please wait."
appears. If the sensors are paired,
the information from the sensors is
displayed.
18
(MENU) button
6
Confirm the information from
the sensors.
Confirm that "OK" is displayed in the
[Error Rate] area.
• If "NG" is displayed in the [Error
Rate] area, the sensor information
is not received properly due to a
communication error. Make sure that
the sensor is activated, bring the
device closer to the sensor and try
pairing again.
• You may not pair with the sensor
due to the influence of the 2.4 GHz
frequency band. If "NG" is displayed
even if the device is moved closer
to the sensor and paired with it, try
again someplace where there is no
interference from microwaves, radio
waves, or wireless equipment.