Technical Specifications - Ayce SRG02-08ET Gebrauchsanweisung

socket-outlet.
8. For correct installation on the wall, thanks to refer to
'Installation on wall' part.
9. Fixed heaters are to be installed so that switches and
other controls cannot be touched by a person in the bath
or shower.
10. WARNING: The heater must not be used if the glass
panels are damaged.
11. WARNING: In order to avoid overheating, do not cover
the heater.
12. WARNING: In order to avoid a hazard for very young
children, this appliance should be installed so that the
lowest heated rail is at least 600 mm above the floor.
Install the heater in the right position of IP24 which
showing in below diagram.
IP24
0,6m
0,6m
THIS PRODUCT IS FOR ROOM HEATING.
FOR HOUSEHOLD USE ONLY.

TECHNICAL SPECIFICATIONS

Model SRG02-08ET
Rated Power 800W
Rated Voltage 230 V~
Rated Frequency 50 Hz
Protective Class I
52 | 53
0,6m
IP24
0,6m
0,6m
SRG03-05E
500W
230 V~
50 Hz
I
GB
IP24