Maintenance; Install The Stainless Steel Sleeve; Uninstall The Stainless Steel Sleeve; Maintenance (Cleaning) - Masterpro BGMP-9081 Bedienungsanleitung

EN

MAINTENANCE

• Please make sure to close the power supply or pull the power line of the product when it breaks
down.
• The maintenance work must be done by professional and technical personnel.
• Please make sure the product checked under the indoor temperature.The damage includes the
injury of power line or the damage of the product's surface. If you find the product is damaged, please
return the damaged things to agents or merchants for changing.

INSTALL THE STAINLESS STEEL SLEEVE

Holding the machine, make sure the unlock sign and arrow arranged in a line and you need to rotate
the stainless steel sleeve with clock-wise until you can see the arrow and the lock symbol in the same
horizontal position.

UNINSTALL THE STAINLESS STEEL SLEEVE

Hold the machine and rotate counterclockwise to remove the stainless steel sleeve.
MAINTENANCE(CLEANING)
Maintenance and Cleaning (stainless steel sleeve and transparent cover)
Turn on the lock of the transparent cover and remove it. The transparent cover and the stainless steel
sleeve can be cleaned in dish-washing machine.
04

THE CLEANING OF MACHINE

Heating tube, pump shaft and inductor can be cleaned in the water with detergent and soft brush.
Please don't soak the whole machine in water.

COMMON PROBLEMS AND MALFUNCTION

Noise:
You can listen to the drone produced by the operation of generator ,bladeand cooling fan when the
machine operates normally. Sound of friction：
The stainless steel sleeve is capacious and need to be pushed into guide slot until you hear the clicks.
The noise will disappear if the stainless steel sleeve is fixed well. The mixing axis may appear flex.If
so, you should turn on the transparent cover and push the shade until centering.
The sound of click:
The pump will generate a vortex of water as well as you clean the sink and bathtub of washroom and
you can add more water or stir water with spoon. The vortex is generated by the rotation of pump,
which can't be diminished by certain methods but it usually dies away.
The damage of food:
The flow of the pump will break the egg or damage the fish fillets. The best method is to put egg into
a bag to prevent the food from cracking inthe container.
Lower water alarm:
Certain water points will decline due to the wave of the pump during the operation of the machine so
you need to add water to guarantee the water level exceeding the minimum water level. Turning on
the lower alarm for seconds and it starts operating.several And you need add more water because the
pump generates "waves" which result in the fluctuation of water line sensor. Sometimes, the waves
are below the sensor of the water line which causes alarm. It is normal phenomenon so you just need
to add enough water.
Please check the power plug and circuit breaker when the machine can't be started. The busy indica-
tor can flicker lightly during the operation of machine, which is normal phenomenon.

PREPARATION BEFORE COOKING

1. Choose a proper container.
A middle-large size metal container is the best choice to hold water. The optimum size is the depth
8(20 centimeters) and the diameter about 12 (30 centimeters) and it can hold about 11 liters water.
2. Put the machine into the container. The clamp is fixed in the rim of the container and the mental part
is put into water.
3. Connect the power supply.
4. Open it and set the temperature and time.
It costs 22 minutes to preheat 4 liters water to 60 °C. The time will count down after the preheating.
5. Seal the food you need to cook.
6. Put food into the pot with water.
7. Don't need to watch the cooking process. You can have a drink or chat with your friends.
8. Serve when the food is well done.
05
EN