Philips Lumea SC2002 Bedienungsanleitung Seite 28

EngliSh
28
Problem Possible cause
The 'ready to flash' light is The appliance
green but the appliance needs to be reset.
does not produce a flash
when I press the flash
button.
The appliance becomes This is normal.
warm during use.
The appliance does not The appliance
show light intensity 1 needs to be reset.
when I switch it on.
The appliance produces The attachment
a strange smell. and/or the filter
glass is dirty.
You have not
shaved the area
to be treated
properly.
You stored the
appliance in a
dusty environment.
The skin feels more The light intensity
sensitive than usual you use is too high.
during treatment.
You did not shave
the areas to be
treated.
The UV filter
of the light exit
window is broken.
The appliance is
defective.
I experience an You did not shave
unacceptable pain the areas to
sensation when I use the be treated
appliance.
All manuals and user guides at all-guides.com
Solution
To reset the appliance, switch off the appliance and
switch it on again. If the 'ready to flash' light is green
but the appliance still does not produce a flash when
you press the flash button, contact the Consumer Care
Centre in your country, your Philips dealer or a Philips
service centre.
No action required.
To reset the appliance, switch it off and on again. If the
appliance still does not show light intensity 1, contact
your Customer Care Centre, your Philips dealer or a
Philips Service Centre.
Clean the attachment carefully. If you are unable to
clean the attachment properly, contact the Consumer
Care Centre in your country, your Philips dealer or a
Philips service centre to replace the attachment.
If there are hairs on the area to be treated, these
hairs may get burnt when you use the appliance. As
a result, you notice a strange smell. Shave the area to
be treated properly before you use the appliance. If
shaving causes skin irritation, trim hairs as short as
possible and use a comfortable setting.
The strange smell disappears after a few flashes.
Check if you have selected the right light intensity. If
necessary, select a lower light intensity.
Shave the areas to be treated before you use the
appliance. If shaving causes skin irritation, trim hairs as
short as possible and use a comfortable setting.
If the UV filter of the light exit window is broken, do
not use the appliance anymore. Contact the Consumer
Care Centre in your country, your Philips dealer or a
Philips service centre.
Contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
Shave the areas to be treated before you use the
appliance. If shaving causes skin irritation, trim hairs as
short as possible and use a comfortable setting.