Unpacking The Appliance - Clatronic AKS 828 Bedienungsanleitung, Garantie

• This appliance is powered by rechargeable batteries that cannot
be replaced.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Do not vacuum combustibles or flammable liquids!
• Do not use this appliance to remove toner particles from a laser
printer or copier to prevent fire or explosion.
• Do not suck up hot ashes or pointed or sharp objects!
• Never vacuum without the filter and filter cover installed.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Check the delivery scope for completeness.
3. Check the appliance for any transport damage, in order
to prevent hazards.
NOTE:
In case of any transport damage, contact your dealer
immediately. Do not use a damaged appliance!
4. Remove the transport lock at the on / off switch.
Scope of Delivery
1 × Appliance
1 × Mains adapter
1 × Charging station / wall holder
1 × Crevice nozzle with brush attachment
1 × Attachment for wet vacuuming
Notes for Use
• The appliance is especially suitable for quickly vacuum-
ing small amounts of dry dirt or dust.
NOTE:
We recommend using only a dry container and filter for
vacuuming dry dirt.
AKS828_IM_new2 (ab PO59647)
• It is furthermore suitable for vacuuming a limited amount
of wet dirt or liquids.
NOTE:
Observe the MAX marking on the container. Maximum
vacuuming capacity: 80 ml.
• The appliance is operated via charged battery. Charge
the battery using the power adapter provided. Direct
power supply via mains adapter is not possible.
On / Off Switch
I = Appliance on
0 = Appliance off
Nozzle Attachments
The different nozzle attachments are easy to attach and to
remove.
Assembly the Wall Holder
Inserting the Plug of the Power Supply Unit
If you want to use the wall holder also as the charging sta-
tion, attach the plug of the power supply unit first.
NOTE:
Turn the plug at the metal end, not at the cable. Use a
pliers if necessary.
29
01.07.21