Connection To The Mains; Power Supply Of Further Devices; Operation - EuroLite LED Laser Derby MK2 Bedienungsanleitung

Connection to the mains

The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.

Power supply of further devices

The jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect
the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power
cables with IEC plugs are available as accessories. In this manner, up to 8 devices can be linked at 230/240
input voltage and up to 4 devices at 110/115 input voltage.
CONTROL
DMX SLAVE
LED
LASER
AUTO SOUND
DERBY
MENU UP DOWN ENTER
MIC
SAFETY ROPE
No. 51741079 EAN 4026397690019
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germa ny ·
· ·

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-16 remote control or in DMX-controlled mode via any
commercial DMX controller.
Microphone sensitivity in Stand Alone mode can be adjusted via the rotary dial.
Operating buttons
MENU
ENTER
UP
DOWN
MK2
SAFETY ROPE
∙
T =45°C
a
T =65°C
c
www.steini ke.de g
Selects the operating mode or returns to the initial screen
Activates a value to be modified or saves a value when modifying
Selects the next menu item or increases values when modifying
Selects the previous menu item or decreases values when modifying
CONTROL
DMX SLAVE
LED
LASER
AUTO SOUND
DERBY MK2
MENU UP DOWN ENTER
MIC
No. 51741079 EAN 4026397690019 ∙
T =45°C
a
T =65°C
c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germa ny · www.steini ke.de g
· ·
31/44
CONTROL
DMX SLAVE
LED
LASER
AUTO SOUND
DERBY MK2
MENU UP DOWN ENTER
MIC
SAFETY ROPE
No. 51741079 EAN 4026397690019 ∙
T =45°C
a
T =65°C
c
Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germa ny · www.steini ke.de g
· ·
00132332, Version 1.0