Technical Data - Stahl 8040 Betriebsanleitung

Technical data

6 Technical data
Version
Explosion protection
Gas explosion protection
Gas explosion protection
(IECEx)
Dust explosion protection
Dust explosion protection
(IECEx)
Certificates
Gas explosion protection
Dust explosion protection
IECEx certification
Rated working voltage
Rated working current
Operating temperature range
Cable entries
Max. Cross-section for
connection
Terminal tightening torque
Flanges
Degree of protection
Material
Housing
Gaskets
Cover fixing
With ambient temperatures < -20 °C, cable entries „suitable for low temperatures"
must be used, or the station must be so positioned that the cable entries are
mechanically protected.
The electrical data is affected by the devices fitted. Please refer to the individual type
and rating plates.
If cable glands other than those manufactured by Fa. R. STAHL Schaltgeräte
GmbH are used, then their degree of protection should be noted.
4
Control and signal station
8040
Type 8040
E II 2 G Ex edqm ia/ib [ia/ib] II, IIA, IIB, IIC, T6, T5 or T4
Ex de ia/ib [ia/ib] m II, IIA, IIB, IIC, T6, T5 or T4
E II 2 D Ex tD A21 IP 65 T 80 °C, T 95 °C, T 130 °C
Ex tD A21 IP65 T 80 °C, T 95 °C
PTB 01 ATEX 1105
PTB 01 ATEX 1105
IECEx PTB 06.0025
max. 690 V, AC
depends on components used
- 20 °C ... + 40 °C
- 50 °C ... + 60 °C on request
Standard: 1 x M 25 x 1.5; cable gland 8161; side below (D);
directly mounted into enclosure wall
Special: in side C (top) and/or side D (below); 1 x M 20 x 1.5; 1 x M 25 x 1.5;
metal cable glands are possible; mounting of metal cable glands in metal flange or via
metal adapter plate
2
2.5 mm
max. 1.2 Nm
In standard design the enclosures are without flanges;
On request they can be fitted with flanges on sides C and D.
Flanges are available in: polyester resin or in brass, powder-coated, dark grey similar to
RAL 7024
IP 66
Polyester resin (glass fibre-reinforced)
PU foam
M 4, cheese head screws, imprescriptible, stainless steel
WARNING
8040606300
S-BA-8040-en-02-15/06/2007