Safety Instructions; Conformity To Standards; Function - Stahl 8040 Betriebsanleitung

3

Safety instructions

Use the station only for its intended purpose.
Incorrect or impermissible use or non-compliance with these instructions invalidates our
warranty provision.
No changes to the station impairing its explosion protection are permitted.
Mount the station only if it is clean and undamaged.
Observe the following when using the station:
National safety regulations
National accident prevention regulations
National installation regulations (e.g. IEC 60079-14)
Generally recognized technical regulations
Safety guidelines in these operating instructions
Characteristic values and rated operating conditions on the rating and data plates
Additional instruction plates on the station
Any damage can invalidate the Ex-protection.
4

Conformity to standards

The station complies with the following standards and regulations:
Directive 94/9/EC
EN 60079-0, EN 60079-7, EN 61241-0, EN 61241-1
IEC 60079-0, IEC 60079-1, IEC 60079-11, IEC 60079-18, IEC 60079-7, IEC 61241-0,
IEC 61241-1
Type 8040 station is suitable for use in hazardous areas, zones 1, 2 and 21, 22.
5

Function

Type 8040 control and signal stations are explosion-protected equipments for local
mounting. They are used for control and switching functions in hazardous areas.
8040606300
S-BA-8040-en-02-15/06/2007
Safety instructions
Control and signal station
8040
3