OUT SYSTEM Technisches Handbuch Seite 31

DESCRIPTION
OUT SYSTEM01 is a water based single-part adhesive, easy to spread and water
resistant, used to bond all types of indoor and outdoor wall coatings.
OUT SYSTEM01 is a tixotropic paste, easy to apply with a roller, with initial wet adhesion able to hold in position
even heavy coatings.
RANGE OF APPLICATIONS
OUT SYSTEM01 is used on all porous and stable substrates used in the building industry to bond OUT SYSTEM
outdoor and in damp indoor environments.
SPECIAL CAUTIONS AND INSTRUCTIONS
- do not use OUT SYSTEM01 to bond non-transpiring coating on non-absorbing substrates;
- do not use on substrates subject to rising damp;
- do not apply with temperatures lower than +8°C;
- shake the content until smooth before using it;
- wash the tools used for application with water, if the product is still fresh; with mechanic means or with
universal thinner if the product is dry;
- do not apply outdoor if it is about to rain or if rain has been forecast: protect the product in the 24 hours after
its application;
- read the Safety datasheet before use.
FEATURES
Colour
Appearance
Bulk specific gravity (23°C, 5010 %RH)
Temperature of application
Time open
Waiting time
Curing time
Final curing time
Resistance to water
Resistance to ageing
Resistance to yellowing
Resistance to temperature
Average adhesion value
Packaging
Storage
Quantities used
white
creamy paste
1,05 kg/dm
3
de +10 à +30 °C
30 minutes at +10 °C / 10 minutes at +23 °C / 5 minutes at +35 °C
0-5 minutes
6-8 hours
24-48 hours
very high
very high
high
+80 °C
25 ± 4 N/50 mm
3 kg in a plastic container
24 months in original packaging, in a dry place indoors, at a tempera-
ture between +5 and +30°C
200-250 g/m
2
10/11